Reduce slip-and-fall accidents outside your facility with this industrial snow-melting walkway mat from HeatTrak. Made of an electrically operated heating element sandwiched between two protective surfaces of reinforced SBR rubber, it's as durable as automobile tires and will endure harsh wear throughout the winter. This version plugs into a 240-volt electrical outlet and measures 24 inches wide by 20 feet long (this size is also available in a 120-volt version). Provides a clean and safe passageway for foot or wheelchair access (view larger). Continuous chevron pattern provides extra traction (view larger). Ideal for use over existing entranceways, stairs, loading docks, handicap ramps, rooftops, and many other surfaces, the HeatTrak industrial walkway mat provides a clean and safe passageway for foot or wheelchair access. It continuously melts snow and ice--at a rate of 2 inches per hour--to keep surfaces constantly safe and clear. Designed to act as an entrance mat, the HeatTrak walkway mat features a continuous chevron pattern to provide extra traction as well as grommet holes that enable you to secure the mat in place. This industrial walkway mat from HeatTrak comes with its own 240-volt power unit (with 6-foot cable), is sold as a single unit, and is backed by a 2-year limited warranty. HeatTrak industrial stair and walkway mats are available in multiple sizes in both 120- or 240-volt versions. Safer, Cleaner Walkways HeatTrak's heating mats are the best solution for winter slip prevention, as they continuously melt snow and ice keeping surfaces constantly clear. And HeatTrak industrial mats are designed with a continuous chevron pattern to provide extra traction. Additionally, HeatTrak mats eliminate the need for salting entranceways, which can lead to messy floors indoors as calcium chloride gets tracked inside by foot traffic. HeatTrak mats also help preserve sidewalks, as calcium chloride will eat away at walkways over time. Easily Portable, No Expensive Installations With HeatTrak there is no need for expensive installations. HeatTrak mats are portable and designed to lie on top of existing surfaces. Just place a HeatTrak mat over existing entranceways, stairs, loading docks, handicap ramps, rooftops, and more to provide a clean and safe passageway for foot and wheelchair access. Durable and Safe The engineers at HeatTrak have taken great care to develop a durable, safe, and effective snow and ice melting system, which can be left outside for the entire winter season. HeatTrak mats are made of an electrically operated heating element that's sandwiched between two protective surfaces of non-slip rubber, making them as durable as automobile tires. HeatTrak's industrial mats plug directly into either 120- or 240-volt outlets using their own equipment leakage circuit interrupter (ELCI). Ideal for entranceways, stairs, loading docks, handicap ramps, and more (view larger). Available Accessory Thermostat Controller Using Your HeatTrak Industrial Mat Because they're designed to be left outside all winter long, you can put your HeatTrak mats out before the winter starts and turn them on when you expect snow. For best results, turn on your HeatTrak mast at least 30 minutes before snowfall so that it melts snow on contact (turning on the mats after snowfall will take longer to melt). Then, keep the mats on a few hours after snow has stopped as you may have water runoff. The mats work effectively down to -5 degrees F and melt snow at approximately 2 inches per hour. To operate the mats, you will need to go outside to turn them on via the power unit. Alternatively, you can purchase HeatTrak's optional thermostat and snow sensing controller (model DS-2B, compatible with both 120- and 240-volt mats), which will automatically turn on your mats when it senses moisture and the temperature drops below 38 degrees F. HeatTrak mats can be used on most surfaces, including concrete, asphalt, stone, and wood decks. However, decks made of plastic/composite material can act as an insulator, and use of HeatTrak mats can leave burn marking or staining. To avoid this, it's best to operate the mat during snow fall hours and not leave them on for extended periods of time, or place strips of plywood under the mats to allow the heat to be properly distributed.
- 240-volt industrial snow-melting walkway mat; measures 24 inches wide by 20 feet long
- Built with reinforced SBR rubber and designed to be left outside for the entire winter season
- Melts 2 inches of snow per hour
- Grommet holes in each corner enables you to secure mat to the ground
- Includes 6-foot power unit; cannot be connected to other HeatTrak mats
No comments:
Post a Comment